Please see the following links for technical information regarding Quail Runs' steel framing products for such important data as LEED, recycle content, ICC-ES (ICBO) reports and SDS.
SSMA Connection Details
Steel Stud Manufacturers Association Connection Details
The details contained in this document are intended as a general guide for using Steel Stud Manufacturers Association (SSMA) member products. These products should not be used in design or construction without an independent evaluation by a qualified engineer or architect to verify the suitability of a particular product for use in a specific application. The SSMA and its members assume no liability for failure resulting from the use or misapplication of the detail drawings contained herein.
This document may not be reproduced or distributed in any form, electronic or otherwise, without the express written consent of SSMA.
In no event will SSMA be liable for any damages, including loss of data or information of any kind, lost profits, cost of cover or any other special, incidental, consequential or indirect damages arising out of this agreement or the use or inability to use the details, however caused, and on any theory of liability.
Warning:
This electronic file is furnished without guarantee of compatibility with recipient’s hardware or software and may contain undetected viruses or other harmful material. It is recommended that the recipient check the electronic file prior to use. SSMA assumes no responsibility for damage to user’s property as a result of receiving and/or using the electronic file.
SSMA Connection Detail CAD Files
Steel Framing Alliance A Guide to Fire & Acoustic Data
A Guide to Fire & Acoustic Data for Cold-Formed Steel Floor, Wall & Roof Assemblies (August 2012)
Thermal Design and Code Compliance for Cold-Formed Steel Walls
Thermal Design and Code Compliance for Cold-Formed Steel Walls (2015)
SDS
In compliance with state Right-To-Know (RTK) laws, and the OSHA’s Hazard Communication Standard which became effective November 25, 1995, we are providing you with a current, updated Safety Data Sheet (SDS) for the product as you have requested from our website.
US Steel
US Steel Galvanized (Hot Dipped) Sheet-Carbon Steel SDS
California Steel Industries (CSI)
GALVANIZED CARBON AND HIGH STRENGTH – LOW ALLOY STEEL (HOT DIPPED)
USS POSCO Industries
SSFSA NOTICE OF CERTIFICATION AUTHORIZATION
SUPREME STEEL FRAMING
SYSTEM ASSOCIATION
THIRD PARTY CERTIFICATION PROGRAM
NOTICE OF CERTIFICATION AUTHORIZATION
ISSUED TO: Quail Run Building Materials
MANUFACTURING LOCATION: 2102 West Lone Cactus Drive
Phoenix, Arizona 85027
This facility is hereby authorized to certify non-structural cold-formed steel framing
produced at the above listed location in accordance with the SSFSA Third Party
Certification Program. Application of certification labels may begin immediately.
Application of labels shall be permitted aslong as the manufacturing location listed
above satisfies the certification program requirements and retains its authorization.
DATE OF AUTHORIZATION:April 16, 2010
AUTHORIZED BY:
David G. Moyer, Vice President
Architectural Testing, Inc.
SSFSA Certification Program Administrator
SSMA Notice of Certification Authorization
This facility is hereby authorized to certify cold-formed steel framing produced at Quail Run Building Material, 2102 West Lone Cactus Drive, Phoenix, Arizona 85027.
Quail Run Building Materials, Inc has been in business since 1986 manufacturing high quality steel framing products and accessories. Our framing members are produced from prime quality mill certified steel. Quail Run is a member of the Supreme Steel Framing System Association (SSFSA). Our bearing and nonbearing steel studs and track meet or exceed all performance requirements set forth by ASTM and are certified as code compliant through a compliance and quality assurance program which includes 3rd party unannounced audits administered by the SSFSA.
Our framing products code compliance is validated by IAPMO under reports ER‐0283 and ER‐0313. Our products comply with the International Building Code (IBC) 2009, 2012, 2015, and 2018. Our framing members are manufactured per the criteria of ICC‐ES AC46.
Specifically, our steel framing members adhere to the following ASTM standards:
- ASTM A 653 Specification for Steel Sheet, Zinc Coated Galvanized or Zinc‐Iron Alloy‐Coated Galvannealed by the Hot‐Dip Process
- ASTM A 924 Standard Specification for General Requirements for Steel Sheet, Metallic‐Coated by the Hot‐ Dip Process
- ASTM A 1003 Standard Specification for Steel Sheet, Carbon, Metallic‐ and Nonmetallic‐Coated for Cold Formed Framing Members
- ASTM C 645 Specification for Nonstructural Steel Framing Members
- ASTM C 754 Specification for Installation of Steel Framing Members to Receive Screw‐Attached Gypsum Panel Products
- ASTM C 955 Standard Specification for Load‐Bearing Transverse and Axial Steel Studs, Runners Tracks, and Bracing or Bridging for Screw
- Application of Gypsum Panel Products and Metal Plaster Bases
- ASTM C 1007 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
- ASTM E 90 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E 119 Test Methods for Fire Tests of Panels for Building Construction and Materials
Michael W Zeeuw
President & COO
Issued By: Quail Run Building Materials, Inc
Issue Date: January 4, 2021
Check for Updates
Submittal Builder
Quail Run Building Materials is proud to present it’s Steel Framing Products submittal builder.
